Monday, March 30, 2009

Pest 5 - Psyllids on Calistemon spp.






This infestation of a species of psyllids that specifically targets callistemon was found at the Botanic Gardens during our Monday sessions. Psyllids belong to the Family Psyllidae, Order Hemiptera and have sucking mouthparts. 

Appearance : The adult insects are small (less than 4mm in length) and look like miniature cicadas.  Adults have two pairs of wings but they are not strong fliers. They are often hard to see because they jump actively. The nymphs of Lerp insects produce a shell-like covering, which gives rise to their name Lerps. The coverings are commonly white in colour, but are highly variable. Some species do not have protective covers. Psyllids are free-living and do not produce lerp coverings but secrete a white powdery wax for protection. 

Damage : The signs of damage to the callistemon is discoloured reddish and yellow patches on leaves, in some areas like blisters, due to the sucking of the nymphs and adults and the toxic saliva . In heavy attacks, infested leaves may fall prematurely. In other plants, some species can produce honeydew which gives rise to the formation of sooty mould. In the case of the callistemon pictured, the nymphs have settled on the undersurface of the leaves, with feeding causing circular lumps on the upper surface and corresponding depressions on the lower surface, with the scale-like insect inside. 

Host : In this case Calistemon spp. but lerp insects can attack other native trees, especially eucalyptus. Each species of lerps are usually quite specific in what native trees they attack. 

Life Cycle : Gradual metamorphosis with several generations within a season. Nymphs usually go through several stages before shedding its exoskeleton to form the winged adult stage. The overwintering of lerps and psyllids is unknown. Spread is usually only to adjacent plants as the adults can't fly far. 

Control : usually a tree can survive an onslaught the first time and nothing need be done. Birds and other predators feed on lerp insects. Pictured below is a predatory beetle.
With repeat attacks that severely weaken a tree it might be worth considering removing that tree and replacing it with a less susceptible species. Only councils have suitable equipment to handle appropriate insecticides which must be systemic (contact sprays are ineffective due to the lerp coverings). For valuable trees, injections of systemic dimethoate (Rogor) could be considered. 

Reference :  Kerruish, A-151
                     McMaugh, pg. 196

Sunday, March 29, 2009

Biological Control of Two-spotted mite





In this activity we observed the release of a predatory mite to control a two-spotted mite infestation on Jatropha macrantha, a tropical plant, located in the Botanical Gardens succulent house. 

Mites are part of the class Arachnida, having 4 pairs of legs (although nymphs have 3 pairs). Both adults and nymphs have piercing and sucking mouthparts and feed on a variety of plants. 
These pests are located on the underside of leaves and can be just visible to the naked eye. They produce quantities of fine webbing. 

Damage to the leaves can manifest as blisters, curls, chlorosis, defoliation, abnormal pigmentation, or as in this case silvering of the leaves. Fruit can be malformed. In cold temperatures, males die but the adult females can overwinter on lower parts of main stem, in cracks or damaged bark and under debris round the base of the main stem. The hibernating adult females change colour from pale greenish or yellowish to red. Populations are greatly reduced in long periods of rain or with good irrigation. Conditions favoured are high temperatues, particularly in summer months. 

The two predatory mites available in Australia are Typhlodromus occidentalis  and Phytoseiulus persimilis, the latter being the one available through private companies. 

Reference : Kerruish, A-194

Pricking out lettuce seedlings




In this activity we used dibblers to gently lift individual lettuce seedlings from seed trays. It was important to handle seedlings by their cotyledons and not by the stem. Each individual seedling was placed in a propagation mix consisting of 50% compost, 50% pasteurised sand, 250gm of dolomite, 250gm of crushed biopellets per 50L of mixture. 

Pest 4 - Pear and Cherry Slug





Pest Name : commonly referred to as "slug" due to appearance, but is correctly the larva of a sawfly, Caliroa cerasi. (Order Hymenoptera).

Appearance of Pest : The adult sawfly is 7mm long, glossy and black. Females have a saw-like ovipositor at the end of the abdomen which is used to make a slit in leaves and deposit eggs. 
The larva or "slug" is what causes the damage. The slug-like appearance comes from the smooth, green slimy exudate what it produces whilst feeding. When fully-fed, the slime is shed and they become orange-yellow. When fully grown, the larva measures 1.3cm in length. It has a body that it slightly enlarged in front and tapered at rear. 

Life Cycle : Complete metamorphosis (the insect hatches from egg in a totally dissimilar from to adult), with 2 generations per year. Pest hibernates as larvae in soil, in spring (late Oct - Nov) adult emerges and lays its eggs in leaves. In two weeks the eggs hatch, larvae thus seen in Nov-Dec. Larvae feed for 3 weeks, then crawl or fall into soil to form pupae. Adult appear again in late Dec-Jan and lay eggs giving rise to the second generation of leaf chewing larva in summer through to autumn. They are generally much more numerous and destructive second time around. They overwinter in soil. Favours cool, moist conditions - adults can only emerge from soil if it moist and larvae can dry up quickly on leaf surface when dry. Spread is by adults flying or being carried by wind - adults can travel large distances. 

Damage : Leaves only are attacked.  In wet weather can fed on undersurface of leaves. The larvae feed mostly on upper surface, leaving veins and lower epidermis - creates the characteristic "window-paning." Leaves can turn brown, shrivel and fall. Continued heavy infestation can severely weaken trees and reduce cropping. 

Host Plants : Ornamental trees, fruit trees, shrubs and climbers : eg. pear, cherry, plum, sometimes peach, nectarine, almonds, quince, hawthorn, cotoneaster, hardenbergia

Controls : non-chemical : Control first generation - avoid overhead watering so that leaves are not wettened, slugs may be squashed manually if only a few trees, fly netting on the soil under the tree can trap emerging flies. Cultivating soil under tree can disrupt and destroy pupae. There are no biological controls.
chemical : Soap-based or Oil sprays, eg Pestoil, botanical extracts eg. rotenone (Derris Dust) - no longer recommended due to a reported increase in Parkinsons Disease, carbamates (eg. carbaryl), organophosphates. Sprays are only justified if the tree is dying or severely affected or in times of drought when defoliation is not tolerated. 

As the pest does not affect fruit, often nothing needs to be done. Natural predators include a paper wasp; birds like blue wrens, shrike thrushes, yellow robins

References :  Kerruish A117
                       natural control of garden pests, Jackie French

Propagating Ferns

Activity Tasks :  March 26th. We propagated spore collected from Dicksonia Antartica and Cyathea Cooperii. Ferns, being primitive plants, lack flowers and so reproduce by spores. Each spore case (housed in the protective sori on the leaflet of the fern frond) contains clusters of sporangia that hold the dust-like spores. To collect this fine spore, the fronds were kept previously in manilla envelopes in a warm, dry place. Spores of most temperate ferns ripen in mid to late summer. 

We prepared a growing media of two parts sphagnum moss peat and one part coarse sand of about 10 litres, mixing in about 2.5 L water - enough so that moisture could still be gently squeezed from the media. We used enough of this media to fill several plastic sealable tubs to a depth of about 3cm from the rim and then into a machine for pasteurisation. Following this we gave the tubs another gentle soak with a watering can before sealing the lids. 

We then gently sprinkled the spore over the surface of the media and again sealed the container, before placing it into a palstic bag to be tied up and stored in the propagating house. Hardy, cool-temperate ferns like Dicksonia can germinate at 15 -20 degress celsius. It can take anywhere between 2 - 26 weeks for the prothalli (the sexual, gametophyte stage) to form on the surface of the media.

OH&S issues : Sphagnum peat needs to be gently rubbed through a sieve, which can raise a lot of particle matter in the air and in large quantities aggravate the airways. As a safety measure we wore dust masks.

Environmental Work Practises/Considerations : Sphagnum peat is a finite resource and quite expensive. The peat we used was sourced from Holland. It is ideal for this type of propagation as it has an excellent water holding capacity and it has a low pH. It requires moistening before use. In the absence of a sterilising/pasteurising unit, the media can be treated by pouring boiling water over the surface. 

Ref :  RHS propagating plants
          Ferns from Spores handout

Harvesting Dutch Cream Potatoes





Area worked in : Production Garden, 25th March 

Activity Tasks : We worked with some of the organic certificate students to harvest a crop of dutch cream potatoes. Potatoes can be left in the ground where conditions permit, but the longer they are left the greater the potential for damage from rot and slugs. Generally speaking, early to mid autumn is a good to time to harvest. We used a garden fork to loosen the soil, being careful not to prick any of the tubers, and then pulling the whole plant out. Potatoes from one plant were placed into a pile to note amount, size and absence of disease in that plant. The best plants were selected to be seed tubers for the next lot of planting. 

Potatoes are best stored in the dark to prevent them turning green and developing high levels of a solanine, (a toxic alkaloid). A double layered paper sack folded loosely at the neck or a hessian bag are ideal. Ideal temperatures for storing are 5 - 10 degrees celsius. 

In the photo below there is a potato on the right with a either a bacterial or fungal rot which only infected one or two potatoes in a particular plant, while the rest of the tubers looked fine. The potato on the left is I think just really big!


















White Clover (trifolium repens), a prostrate perennial herb with a rhizomatous growth habit, had been planted in rows along the beds to discourage the spread of rope twitch (agropyron repens). 

OH&S issues/PPE used : usual protective clothing to avoid exposure to sun and allergens. 

Environmental Work Practises : Leafy growth was disposed by composting and diseased potatoes were to be composted in a separate pile. It is recommended to avoid replanting potatoes in the same area for at least 4-5 years to avoid disease infestation. 

References :  RHS guide to fruits and vegetables

Friday, March 20, 2009

Using the mulcher

Activity : 
During the work practical on the TAFE campus I worked in a group of three people to feed pruned branches of allocasuarinas removed from garden beds through a mulcher. Pre-safety check of machine included checking fuel, oil and air filter and removing any stuck debris prior to starting. One person collected cuttings of similar size, bundled them and handed them to the other person who was feeding them into the funnel of the mulcher. A good tip was to never use a pair of sequateurs near the inlet as they could drop into the mulcher. The third person was on the other end, sweeping the mulch away and collecting it into a wheelbarrow. We found that we needed to feed the pile a second time to get a good sized mulch. The machine was washed down after a couple hours after it had cooled down properly. 

OH&S issues : 
Eye injury from flying wooden debris, dropping hand tools into mulcher damaging the tool and the machine blades, hearing damage from exposure to loud noise all highly likely to occur and of high potential impact. Other issues include exposure to dust and sun. 

P.P.E. used : 
To address these risks, we were required to wear protective goggles, helmets fitted with mesh masks and ear muffs, as well as gauntlets to protect hands and arms during handling and feeding of the prunings and cuttings. We also wore full sleeve shirts and long pants with steel cap boots and high visibility vests. 

Environmental Practises : 
This was a reasonable way of recycling green waste back to the garden although it does require the burning of fossil fuels. The machine we used was inefficient and created alot of noise pollution.